Limiting Seller Liability in M&A: Baskets, Caps and Sunset Clauses
In the sale of a company, the seller’s representations and warranties are crucial, but if they are set incorrectly, they can lead to long-term liability and significant financial losses. This article will guide you through effectively limiting risks using mechanisms such as a basket, cap, and sunset clause, so you can avoid common mistakes that cost sellers hundreds of thousands to millions of Czech crowns.

Table of Contents
Why representations and warranties are a critical risk
When you sell a company, it is not just about handing over physical assets. In reality, the buyer is purchasing a package of rights, liabilities, contracts, employees, and legal relationships. For this reason, in the share purchase agreement you typically guarantee dozens of pieces of information about the company—from the state of the accounts and tax matters to the existence of hidden debts or legal disputes.
In legal terms, these guarantees are called representations and warranties (often abbreviated as R&W). Their essence is that the seller promises the buyer: “This information about the company is true. If it later turns out not to be, I will pay you financial compensation."
At first glance, that sounds straightforward. In practice, however, it often gets completely out of control. Sellers usually sign dozens of pages of warranties without a thorough review, without knowing what exactly they are warranting, and—critically—without agreed limits on their liability.
The result? The transaction closes, the buyer owns the company, and then a few months or years later they “happen” to notice something that, under your warranties, should not have existed. They come back to you and ask where their money is. This means you may be liable for matters you may not even have been able to influence—often years after you have sold the company and are no longer receiving any income from it.
Types of warranties for which the seller is liable
Not all warranties are created equal. In a typical share purchase agreement, you will find several categories:
Title warranties
Here, the seller warrants that the shares or ownership interests being sold have good title. This means they are not encumbered by third-party rights (e.g., pledges, easements), that the seller owns them without legal restrictions, and that there are no pledges, easements, or third-party options that could limit their value. Example: “The 100% interest in company X is not encumbered by a bank pledge or any other restriction."
Asset-related warranties
The seller warrants that the company’s assets are in a certain condition, that machinery and equipment are functional, that real estate is free of legal defects, and that it is properly registered in the Czech Land Registry (Czech Cadastre of Real Estate). This is where issues gradually come to light such as: “The engine of the company vehicle is defective” or “The land is not registered in the public register in our company’s name, but in the name of the previous owner from the last decade."
Legal warranties
The seller promises that all contracts with customers and suppliers are valid, that they do not conflict with applicable law, and that there are no court proceedings or arbitrations that could be threatened. At the same time, the seller warrants that intellectual property—patents, trademarks, copyrights—is duly registered and that the company does not infringe any third party’s intellectual property rights.
Financial warranties
Here, the seller warrants that the financial statements are accurate, that the assets reflect the true state of affairs, that the accounts have not been manipulated, that there are no hidden debts, and that all assets shown on the balance sheet are real and belong to the company. It is precisely in this category that problems most often emerge later—the buyer discovers that revenues were lower than reported, or that there is a debt that was not mentioned in the accounts at all.
Tax and legal warranties
The seller warrants that all tax returns have been filed on time and correctly, that there are no unpaid taxes from prior periods, that there are no ongoing tax audits, and that the company has acted in compliance with the law.
Liability limits: basket, cap, and sunset clause
This is where we get to the heart of the issue. Without properly setting limits, the seller would, in theory, be liable for every minor issue that later emerges—forever, or at least for a very long time.
That is why, in professional M&A transactions, three mechanisms are standardly agreed to limit risk: the basket, the cap, and the sunset clause.
Basket – minimum threshold
The basket (also called a deductible) is the minimum amount a claim must reach before the seller’s liability is triggered at all. It is typically set at 0.5% to 1% of the purchase price; in smaller transactions, sometimes as fixed amounts around CZK 50,000–200,000.
Example: If the purchase price is CZK 10 million and the basket is set at CZK 100,000, then: if an issue arises with a value of CZK 50,000, the seller pays nothing. If an issue arises with a value of CZK 150,000, the seller pays CZK 150,000 (or, depending on the type of basket, only the difference of CZK 50,000—see below).
There are two types of basket:
1. True basket (deductible basket) – the seller pays only the amount exceeding the basket. If damages are CZK 150,000 and the basket is CZK 100,000, the seller pays only CZK 50,000.
2. Tipping basket (first dollar) – once total damages reach the basket, the seller pays all damages from the first dollar. If damages are CZK 150,000 and the basket is CZK 100,000, the seller pays the full CZK 150,000.
The seller naturally prefers a true basket (pays less), while the buyer prefers a tipping basket (pays more). In practice, this is often a compromise.
Cap – maximum liability limit
The cap (ceiling) is the maximum amount the seller must pay for all breaches of warranties in aggregate. It is typically set at 10%–50% of the purchase price, depending on the type of transaction and the type of warranties.
Example: If the purchase price is CZK 10 million and the cap is set at 20% (i.e., CZK 2 million), then even if breaches arise with a total value of CZK 5 million, the seller will pay a maximum of CZK 2 million.
The cap often differs depending on the type of warranties:
- General warranties: cap of 10%–20% of the purchase price
- Fundamental warranties: cap of 50%–100% of the purchase price
- Tax warranties: the cap may be even higher, often unlimited
Important: The cap usually does not apply to breaches caused by intentional fraud or knowing misrepresentation. If it is proven that you deliberately misled the buyer, the cap will not apply and you will be liable without limitation.
Sunset clause – time limitation of liability
Without a time limit, the seller would, in theory, be liable forever. That is why sunset clauses are agreed—time periods after which the warranties expire.
Typical setup: general warranties for 12–24 months from completion of the transaction, tax warranties for 3–10 years (in line with the time limit for assessing tax under the Czech Tax Code), legal warranties until the expiry of the limitation period under the Czech Civil Code (typically 3 years, up to a maximum of 10 years). Fundamental (“fundamental”) warranties are often not subject to a sunset at all, or the period is very long.
Example: If the sunset clause is 24 months from closing and the transaction closed on 1 March 2024, the warranties expire on 1 March 2026. If the buyer discovers an issue on 2 March 2026, it is out of time and they cannot bring a claim against you.
Objective vs. subjective warranties – knowledge qualifiers
One of the most important negotiation points is the question: are you liable for what you know, or for everything regardless of your knowledge?
Objective warranty (without a knowledge qualifier)
“The Company has all necessary licences and permits.”
Here you are liable regardless of whether you knew or could have known that a permit was missing. If it is later found that any licence is missing, you pay. This is a very risky position, because you could be liable even for matters you were not aware of and could not have been aware of.
Subjective warranty (with a knowledge qualifier)
“To the Seller’s knowledge, the Company operates in compliance with legal regulations.”
Here you are liable only if you knew or should have known that the Company was not acting in compliance. This is a much safer position. If the issue was hidden and even a reasonable businessperson would not have noticed it, you are not liable.
Practical point: Buyers typically push for objective warranties, sellers for subjective ones. In M&A transactions, a compromise is common – some warranties remain objective (for example, warranties regarding the company’s legal form, title/ownership), while others are qualified by knowledge.
Most common mistakes made by sellers
Mistake 1: Not accounting for multi-year liability
Many sellers think that once they close the transaction, it is over. In reality, liability often continues for years. If you warranted tax matters, you face liability for 3–10 years. If you warranted legal matters, you remain liable until the limitation period expires (often 3–10 years).
Real-life example: The seller warranted that “the company has no tax arrears.” Two years after closing, the Czech tax authority reviewed the period during the seller’s ownership and found CZK 2 million in tax debt. The seller must pay, even though they have not owned the company for two years, because the sunset clause for tax warranties typically runs for three years (or longer if the time limit for assessing tax was extended).
Mistake 2: Signing representations and warranties without review
Many sellers receive a draft share purchase agreement from the buyer’s lawyer and sign it without any meaningful reading. The buyer’s lawyer primarily protects the buyer – not you. The result is that you sign countless warranties that you cannot comply with, or that are drafted extremely to the seller’s disadvantage.
Real-life example: A warranty reads: “There are no potential legal disputes.” This is incredibly broad – if you have a dispute with any employee, with a neighbour, or with anyone else and it later comes to light, you have breached the warranties. A proper lawyer would reject such wording or qualify it by knowledge and a time limit.
Mistake 3: Retaining unlimited risk without a cap
Without a cap, you can theoretically end up with liability exceeding the original purchase price. Say you sold the company for 10 million and, without a cap, you could theoretically pay 20 million on a claim for hidden debts. That is logically unsustainable.
Mistake 4: Not negotiating the escrow holdback at the right level
An escrow holdback is a portion of the purchase price that is not paid out on the closing date, but is held in escrow with a third party (typically a lawyer or a bank) for 12–24 months. If the buyer discovers a breach of warranties, they will draw compensation from the escrow.
If the escrow holdback is too low and a major issue later emerges, the buyer will sue you for the remainder. If the escrow holdback is disproportionately high, you lose a lot of money that could have been paid to you immediately after signing. Typical holdbacks: 10–20% of the purchase price.
Escrow and indemnification – how it works in practice
The practice of selling a company usually works as follows:
1. Signing: Both parties sign the purchase agreement with defined warranties, limits and conditions.
2. Closing: On the closing date, the transfer of the ownership interest/shares to the buyer is completed, the base portion of the purchase price is paid (usually 80–90%), and the escrow portion is deposited with a third party (10–20%).
3. Monitoring period: Over the next 12–24 months, the buyer “checks” the company’s actual condition. They may discover matters they did not know during due diligence.
4. Indemnification claim: If the buyer identifies a breach of warranties, they will send you a formal notice of the issue and the amount they wish to claim.
5. Settlement: If you agree on the amount and it is available in escrow, the money will be deducted from the escrow. If you do not agree, litigation usually follows.
Example: The seller warranted that “the company has no hidden debts exceeding CZK 1 million.” Six months after closing, the buyer discovers an invoice for CZK 1.5 million from a supplier from the previous year that was not recorded in the accounts. The buyer sends a notice and wants to claim CZK 1.5 million. If this is within the cap and the sunset clause has not yet expired, the seller will have to pay from the escrow (or from their own funds if the escrow has been depleted).
Related questions on setting liability limits
1. What if an issue is discovered very shortly before the sunset clause expires?
If an issue is discovered only a few days before the sunset clause expires and you are sure it constitutes a breach, you should report it without delay. The buyer must submit the notice in time to be within the deadline. If the notice arrives after the sunset clause expires, you are no longer liable.
2. Can the sunset clause be extended?
Yes, some agreements include so-called tolling provisions – if a new issue arises during the sunset period, the time limit for that specific claim may be extended or may start running again from the moment it is reported. This is usually stated explicitly in the agreement.
3. Which type of basket is better for me as a seller – a true basket or tipping?
As a seller, you prefer a true basket, because you only pay the amount exceeding the basket. A tipping basket means that once the basket is reached, you pay everything from the first dollar. In negotiations, a compromise is often offered – a hybrid basket.
|
Potential issues |
How ARROWS helps (office@arws.cz) |
|
Unlimited warranties with no cap – you sign representations and warranties without a maximum liability limit, and later you may face claims amounting to countless millions |
We will set a reasonable cap (usually 10–20% of the purchase price) to keep your risk at an acceptable level, and we will demonstrate to the buyer that this is market standard. |
|
No basket agreed or the basket is ineffective – every minor issue counts and spreads your liability |
We will set an effective basket (tipping or true, depending on the situation) with a clearly defined amount (typically 0.5–1% of the price), so minor issues are not billed. |
|
The sunset clause is missing or too long – you remain liable for 10+ years for matters you forgot long ago, and the risk never ends |
We will agree a reasonable sunset with the buyer: 12–24 months for standard warranties, longer (3–10 years) only for tax and legal areas, with a clear focus. |
|
Subjective warranties replaced with objective ones – you are liable even for matters that did not concern you and that you could not control |
We will negotiate knowledge qualifiers with the buyer on critical points and ensure that objective warranties cover only what you can genuinely guarantee. |
|
Excessive focus on a specific area – the buyer pushes through disproportionately long or broad warranties in one area (e.g., IT, employees), while leaving you unprotected in others |
We will professionally review all warranty categories and negotiate proportionate protection; in complex discussions, we will bring in an expert from the relevant field. |
Practical negotiation tips
Prepare a list of matters you can genuinely guarantee
Before you start negotiating, sit down honestly and make a list: “What do I really know about my company? What can I guarantee with certainty?” You cannot promise everything the buyer wants. If you say “yes” to warranties you are not sure about, you will pay for it later.
Negotiate by categories
Do not try to negotiate every sentence. Instead, divide the warranties into categories and agree a cap and basket for each category. For example: financial warranties: cap 20%, basket CZK 100,000; legal warranties: cap 30%, basket CZK 50,000; tax warranties: cap without limit, basket CZK 50,000, sunset 5 years.
Disclosure schedule
Prepare a “disclosure schedule” with the buyer – an annex to the share purchase agreement where you clearly specify all exceptions and issues you are aware of. If something is in the disclosure schedule, the buyer cannot later treat it as a breach of warranties. This protects both sides – the buyer knows what to watch out for, and you will not pretend there is no issue.
Qualify warranties by knowledge
Where it makes sense (e.g., for threatened disputes), insist on a “to the seller’s knowledge” or “so far as I am aware” qualifier. This protects you from liability for matters you genuinely could not have known.
Related questions on working with indemnity clauses
1. What is the difference between a basket and a cap? Do I need both?
Basket is a minimum threshold – if a claim is below it, you pay nothing. Cap is a maximum limit – if all claims exceed the cap, your liability is capped. The basket protects you from minor issues; the cap protects you from catastrophic risk. They are complementary.
2. What happens if I become insolvent during the sunset clause period?
If you are insolvent and the buyer discovers a breach of warranties, they will typically pursue the claim against the insolvency estate as a creditor. However, the sunset clause still runs – if the buyer misses it, insolvency cannot extend their rights.
3. Should I have any documents on the company’s condition at signing?
Absolutely yes. Ideally, you should have a list of all matters you later warrant, with a date and a description of the condition. This will help later if a dispute arises – you can prove that the matter was in a certain condition and that the buyer took it over in that condition.
4. Can liability under R&W be insured?
Yes, there is so-called warranty and indemnity insurance (W&I). This insurance can be paid by the insurer instead of you in the event of a breach of warranties. It is very advantageous for the seller, but the buyer usually does not fund it. If you want to obtain W&I insurance, it is usually at your cost.
Final summary
Representations and warranties are the heart of every share purchase agreement. Put simply: they are your promises to the buyer about the condition of the company. If they are set incorrectly, they can cause you years of problems and financial losses.
It is critical to set three protection mechanisms correctly: the basket – so minor issues do not count, the cap – so your liability has a ceiling, and the sunset clause – so liability ends within a reasonable time.
Even more important is to discuss in detail with a qualified attorney what you are truly guaranteeing and what you are not. We do not recommend taking the signing of a share purchase agreement lightly if you know you do not understand the individual warranties.
The attorneys at ARROWS, a Prague-based law firm, specialise in company sales and in setting the right structure of warranties and liability limits. If you want to ensure that your representations and warranties are not a tool the buyer later uses to put you under pressure, contact us. We will review every sentence of the share purchase agreement and ensure you are liable only for what you can genuinely guarantee. Contact us at office@arws.cz.
Most common questions on setting liability when selling a company
1. What percentage of the purchase price should the cap typically be?
The cap is usually set at 10–50% of the purchase price, depending on the type of transaction and the risk profile. In small and mid-sized transactions, caps of 20–30% are common; in larger transactions, it is typically 10–20%. Fundamental warranties (e.g., the company’s legal form) may have a cap up to the full purchase price. Everything depends on negotiating leverage and available tools – the attorneys at ARROWS can help you with such negotiations at office@arws.cz.
2. What sunset clause period is recommended for standard warranties?
As a standard, for ordinary warranties (financial, operational), the sunset clause is set at 12–24 months from closing. For tax warranties, typically 3–10 years (depending on the tax assessment limitation period), and for legal warranties until the limitation period expires (standardly 3 years, maximum 10 years). The longer the sunset, the longer you bear the risk – you should be clearly aware of this. The attorneys at ARROWS can help you negotiate a proportionate sunset for individual categories – contact us at office@arws.cz.
3. What happens if an issue is discovered that breaches the warranties, but the escrow is empty?
If the escrow has been depleted (all funds have been paid out for previous claims) and another issue arises, the buyer may sue you directly. They will not receive money from the escrow – you will have to pay yourself. This is why it is important to set the escrow holdback at an adequate level. The attorneys at ARROWS can help you determine a reasonable escrow holdback amount for your specific situation – email us at office@arws.cz.
4. Am I liable for things I could not have known?
That depends entirely on the wording of the warranties. If the warranties are objective (“The Company has all permits”), you are liable regardless of your knowledge. If they are subjective (“To the seller’s knowledge, the Company has all permits”), you are liable only for what you knew or should have known. The attorneys at ARROWS will push for a subjective qualification (“knowledge qualifier”) wherever it is logical and defensible – contact us at office@arws.cz.
5. What should I do when the buyer reports a breach of warranties and requests compensation?
The first step is to clearly verify whether the claim is valid (i.e., whether it truly breaches the warranties under the agreement), whether it is within the time limit (sunset clause), and whether it falls within the cap and basket. Then you should request documentation from the buyer. If you agree on the amount and it is covered by the escrow, the matter is straightforward – the funds are transferred. If you are not sure whether the claim is justified, you should engage a lawyer to review it. ARROWS, a Prague-based law firm, can advise you in such situations and, if needed, represent you – email office@arws.cz.
6. What is the difference between a basket and a cap? Do I need both?
A basket (minimum threshold) and a cap (maximum limit) are two different mechanisms. The basket protects you against minor issues – it says, “you are not liable for anything below this amount.” The cap protects you against unlimited risk – it says, “you are liable only up to that limit.” They are complementary – without a basket you face countless small claims, and without a cap you may face catastrophically large liability. In practice, both are almost always agreed. The attorneys at ARROWS can help you set both correctly – contact us at office@arws.cz.
Notice: The information contained in this article is of a general informational nature only and is intended for basic guidance on the topic under the legal framework as of 2026. Although we take maximum care to ensure accuracy, legal regulations and their interpretation evolve over time. We are ARROWS advokátní kancelář, an entity registered with the Czech Bar Association (our supervisory authority), and for maximum client protection we are insured for professional liability with a limit of CZK 400,000,000. To verify the current wording of regulations and their application to your specific situation, it is necessary to contact ARROWS advokátní kancelář directly (office@arws.cz). We accept no liability for any damages arising from the independent use of the information in this article without prior individual legal consultation.
Read also:
- Reps & Warranties in M&A: How They Protect Buyers and Sellers
- Disclosure Letters in M&A: Structure, Risks and Common Mistakes in Czech Deals
- Pre-Closing Covenants in Share Deals: Seller Obligations and Key Risks
- Managing Seller Risks Between Signing and Closing in Company Sales
- Protecting Equity Value Between SPA Signing and Closing in M&A Deals